OFP-60LED

OFP-60LED
$ 67575
Product ID : 36
Available : InStock

Min Order Limit : 1

Product Description

Wattage High — 1300W / Low — 650W (2 levels of heating)
Voltage 120V 60Hz
Material One-piece log/stone and plastic crystals
Installation Wall-mounted and built-in
Timer 1-9 hours
Control Mode Touch Panel / Remote Control
Flame Colours 10 colours (9 colours + cycle)
Flame Brightness 1 level (Brightness cannot be adjusted)
Overheat Protection Yes
Heating Area 16-20m²

Installation

  • Please take out the foam that is inside the unit before using the heater.

  • Remove the glass panel first, set the firebox into the wall.

Secure the side trim pieces on the wall with screws.

  • Reinstall the glass panel onto the firebox with screws.

  • Remove the outer glass around the bracket, mounting screws

  • Remove the outer glass

  • Take out the foam

  • Install the outer glass to the appliance:
    Lift glass panel and line up with the top bracket, fasten the panel to the appliance.
    Screw the brackets to the appliance with mounting screws

  • Be cautious about the outer glass bracket screws

Glass Particles Installation

  • To remove the outer glass around the bracket, undo the mounting screws

  • Remove the outer glass

  • Adjust the screws and carefully take out the log set

  • Gently put the glass crystals into place

  • Be cautious about the outer glass bracket screws

  • Integrated remote control and touch control pad

  • Has 3 ember bed selections which plastic crystals, one-piece log/stone consist

  • Automatic overheating protection with a timer of 1 hour increments up to 9 hours

  • Two-stage fan-forced air heater which you may use with the heater or without for ambiance

  • Includes LED 9 color flame, one color cycle, and one-off status and the same applies to the side lighting

Customer Reviews

Related Products